1.
Solid Wood Drawer Boxes
Deluxe drawer boxes have 11/16" thick solid wood sides
and 1/4" hardwood plywood bottoms, glued and stapled
together.
2.
Multi-Ply Hardwood Boxes
1/2" thick #1 grade multi-ply hardwood plywood with
furniture grade oak, maple or cherry wood veneer on
exterior exposed surfaces.
3.
Hanging Rails
3" x 3/4" thick, multi-ply hardwood plywood running full
cabinet length top and bottoms. Base cabinets have
7-1/4" high x 3/4" thick solid wood structural support at the top rear. All hang rails are rabbeted to inset in end
panels and backs.
4.
Back Panels
1/4" thick, multi-ply hardwood plywood stapled and
structurally glued to rabbeted ends and hang rails.
5.
Top and Bottom Panels
1/2" thick multi-ply hardwood plywood. Tops and bottom
are structurally glued and stapled into insets in end
panels, front rails and hang rails. Bottoms are also
supported at rear of base cabinets by 1/2" thick multi-ply
hardwood plywood.
6.
Shelving
10-7/8" deep x 3/4" thick multi-ply hardwood plywood.
Hardwood veneer banded to front edge. Fixed base
cabinet shelves are dadoed into end panels. Wall
cabinets have adjustable shelves supported by
self-locking, lexan buttress supports.
7.
Side End Panels
1/2" thick, multi-ply #1 grade hardwood plywood. Oak,
maple or cherry furniture grade veneers on exterior
surfaces. Clear coated burch veneer on interior surfaces.
Hardwood plywood ends are dadoed to receive tops
and bottoms and inserted into dado in face frame.